How To Clean Shower Tiles Without Scrubbing | 5 Effective Ways

How To Clean Shower Tiles Without Scrubbing

If your shower tiles look a little worse for wear, don’t worry – there’s no need to get the scrubbing brush. With a few simple household ingredients, you can quickly and easily get your tiles sparkling clean without any elbow grease. Here’s how:

Cleaning Your Shower Tiles Without Scrubbing

Baking Soda

Before we jump right into it,  Let’s examine some of the ingredients you can get in your home or a nearby store that will help you clean your shower tiles without scrubbing.

Baking soda is a popular baking ingredient, but it can also be used for a variety of domestic tasks. This includes eliminating unpleasant smells and stains and counteracting bacterial growth.

Summary – To clean shower tiles without scrubbing, you need some simple ingredients you probably already have in your home. Mix equal parts of baking soda and vinegar to form a paste. Then, apply the paste to the shower tiles and let it sit for a few minutes. Next, use a soft towel to wipe the tiles. Rinse the tiles with water and dry them off.

Cleaning Your Shower Tiles with vinegar, Hydrogen peroxide and baking soda


Vinegar is a versatile acidic liquid with excellent properties when it comes to penetrating surfaces, removing dirt, and acting as a disinfectant.

Hydrogen peroxide

Hydrogen peroxide is a natural alternative to bleach that will cleanse and brighten virtually any surface. It is composed of anti-fungal and anti-bacterial properties, yet, it’s not a strong acid.

To effectively use these natural substances, you need to make them into a solvent that breaks down dirt. You can choose one from the options below that will work well for you.

Solution One: Baking Soda and Hydrogen Peroxide

  • Mix ½ cup sodium bicarbonate with ¼ cup hydrogen peroxide until well blended.
  • Pour the mixture into a spray bottle and spray on the shower tiles. (Pay attention to the grout).
  • Leave it on for 20-30 minutes.
  • Wipe the shower tiles with a small towel
  • Rinse the surface with water and allow it to dry.

Solution Two: Vinegar and Baking Soda paste:

  • Prepare 1/2 cup of baking soda and 1/4 of vinegar paste.
  • Apply unsparingly to stained tiles until all areas are completely covered.
  • Sprinkle more vinegar over the tiles and let it remain for an hour.
  • Rinse the shower tiles with water.

Solution Three: Baking Soda, Water, and Vinegar

  • Mix baking soda and water until you have a paste
  • Rub this paste generously over the shower tiles and into the tile grout
  • Spray vinegar on baking soda paste (you will notice bubbles when vinegar touches baking soda)
  • Rinse shower tiles with warm water after the bubbling has subsided
  • Dry with a clean cloth
Baking Soda, Water, and Vinegar then dry with clean cloth

Solution 4: Vinegar and Dishwashing Soap

  • Mix 2 cups of vinegar with 3 tbsp of dishwashing soap.
  • Put the mixture in a spray bottle.
  • Spray directly on shower tiles.
  • Let the mixture rest on the tiles for 20 min.
  • Rinse and dry with a cloth.

These natural ingredients do an excellent job of cleaning your shower tiles. However, it is necessary to do a test before using them. Apply the solution to hidden areas of your shower tiles, and wait a few minutes to see how the tiles and grout react. 

Some types of tiles can react negatively to strong or acidic substances such as vinegar. It may permanently discolor the tiles or wear them down.

Steps to Properly Clean Your Shower Tiles Without Scrubbing.

vacuum floor tiles to Clean Your Shower Tiles Without Scrubbing.
  • Sweep or vacuum floor tiles
  • Steam clean shower tiles – Run the shower at its hottest temperature for approximately five minutes, or you may boil some water and pour it on the shower tiles. Hot water and steam will loosen any tough dirt or stains.
  • Choose any of the stated solutions that work for you.
  • Apply the solution to your tiles and leave it to settle in the tiles for a few minutes, as stated in the guide above.
  • Rinse out with water; It’s best to use warm water.
  • Clean with a soft cloth and let it dry out completely,
  • You should now have your shower tiles sparkling as new!

Other Ways to Maintain Your Shower Tiles.

In addition to these homemade cleaning solutions, there are other things you must know for the maintenance of your shower tiles.

  • Don’t use harsh chemicals that could stain or damage the natural texture of your shower tiles.
  • Don’t leave the shower tiles damp always. You can clean them with a mop or a soft fabric. However, water can seep into the back of the shower tiles, allowing dangerous mold to build up.
  • Don’t rigorously scrub with a hard brush; it might make the surface of your shower tiles rough. Instead, clean with a mop or soft cloth.
  • Use a Squeegee. Using a squeegee each time you use your shower will protect your shower tiles.
  • Leave your bathroom window open for one hour, or keep the fan running for 20-30 minutes to reduce humidity.
  • Reseal grout once or twice a year

FAQs On How To Clean Shower Tiles Without Scrubbing

How Often Should You Clean Your Shower Tiles?

Cleaning shower tiles should be done once a week or twice at most. You can take up a few daily rituals to make cleaning easy for you, like taking 30 seconds after each shower to get rid of excess water or spraying disinfectant on your tiles to keep them safe.

Is it a Good Idea to Clean Your Shower Tiles Without Scrubbing? 

Cleaning your shower tiles without scrubbing is effective and a good idea. Not only is it less exhausting, but it also protects your hands and back from pain. Plus, it saves time!

What is A Squeegee and How Often Should You Use It

A squeegee is a tool with a smooth, flattened rubber blade on a handle that spreads, pushes, or wipes water or any liquid off flat surfaces. It should be used after each shower to wipe shower tiles. This practice prevents your shower tiles from mold and helps them last longer.

Leave a Comment

Your email address will not be published. Required fields are marked *